VOLVO
ECM-P069219 - Fan 1 Control Circuit High. General Electrical Failures. Circuit current above threshold
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
2 modelsS80 (2007–), XC90 (2003–)
Show models by year and engine (2)
What does this fault code mean?
The code indicates that the current in the electric cooling fan is too high. A blocked fan, for example a fan blade that cannot move freely, is a possible cause. Related codes for the same fan circuit are ECM-P069211, ECM-P069212 and ECM-P069213.
Possible causes
- Electric cooling fan blade is blocked
- Damaged cooling fan control module
- Loose connection, contact resistance or oxidation in the connections
What you can do
- 1Read and clear the fault code, and test-drive to see whether it returns
- 2Check that the electric cooling fan is not blocked by dirt, debris or anything preventing the blades from turning. Do this with the engine switched off
- 3Check the fuse for the electric cooling fan in the owner's manual
- 4Look at the connectors at the cooling fan control module for loose contacts, oxidation and chafing
- 5If you have a diagnostic tool, read the requested fan speed in live data and check whether the fan follows it while the ignition is on
- 6If the fault remains after these checks, have a workshop check the electric cooling fan and its control module
Symptoms you may notice1
- Electric cooling fan does not work
What the fault can affect1
- Electric cooling fan is activated at a predefined speed
General guidance for car owners. Diagnosis on the car can point to a different cause.