ECM-P06E968
VOLVO
ECM-P06E968 - Engine Starter Performance. Algorithm Based Failures. Event information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (27)
- Volvo S60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013All engines except: B4164T, B4164T2, B4164T3, B4204T7, B6304T4, D4162T
- Volvo S60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, B5254T14, D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S60 (2011–)2015Engine B5204T8, B5204T9, B5254T12, B5254T14, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23 only
- Volvo S80 (2007–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo S80 (2007–)2013–2014Engine B5254T12, B5254T14, D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S80 (2007–)2015Engine D5204T3, D5244T15 only
- Volvo V40 (2013–)2013All engines except: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014All engines except: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9, D5204T6 only
- Volvo V40 Cross Country (2013–)2013–2014All engines except: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, B4204T11, D4162T, D4204T14
- Volvo V60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013All engines except: B4164T, B4164T2, B4164T3, B4204T7, B6304T4, D4162T
- Volvo V60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2015Engine B5204T9, B5254T12, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo V70 (2008–)2013Engine B5204T9, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17 only
- Volvo V70 (2008–)2014Engine B5204T9, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo V70 (2008–)2015All engines except: B4164T, B4164T2, B4204T11, B6304T4, D4162T, D4204T5
- Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2013All engines except: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2015Engine B5204T9, B5254T12, B5254T14, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23 only
- Volvo XC70 (2008–)2012–2013All engines except: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Engine D5204T3, D5244T11, D5244T12, D5244T15, D5244T17 only
What does this fault code mean?
The code is event-controlled and intended as information. It does not indicate a fault in the control module where it is active. The control module checks engine speed during start attempts, and the code is set when the speed is not high enough after a start request.
Possible causes
- The code does not come from a fault that requires repair
What you can do
- 1Read the fault code and clear it, then start the engine to see whether it returns
- 2Because the code is informational it normally does not need remedying. Still check that the engine starts as usual
- 3If the engine keeps starting poorly, have a workshop check the starting performance
Symptoms you may notice1
- Engine does not start, and it is impossible to say when it happens
General guidance for car owners. Diagnosis on the car can point to a different cause.