VOLVO
ECM-P070000 - Transmission Control System (MIL Request). General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (26)
- Volvo S60 (2011–)2011–2012Engine B5254T5, B6304T4 only
- Volvo S60 (2011–)2013–2014Engine B6304T4 only
- Volvo S60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2007–2008
- Volvo S80 (2007–)2009All engines except: D5244T10
- Volvo S80 (2007–)2010All engines except: B4204T6, B6324S, B8444S, D4164T, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Engine B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, B6304T4, B6324S4 only
- Volvo S80 (2007–)2012Engine B5254T10, B6304T4, B6324S4 only
- Volvo S80 (2007–)2013–2015Engine B6304T4, B6324S4 only
- Volvo V60 (2011–)2011–2014Engine B6304T4 only
- Volvo V60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
- Volvo V70 (2008–)2008
- Volvo V70 (2008–)2009All engines except: D5244T10
- Volvo V70 (2008–)2010All engines except: B4204T6, B6324S, D4164T, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Engine B4204S3, B4204S4, B5254T10, B5254T11, B6304T4 only
- Volvo V70 (2008–)2012Engine B5254T10, B6304T4 only
- Volvo V70 (2008–)2013–2015Engine B6304T4 only
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S2 only
- Volvo XC60 (2009–)2011–2015Engine B6304T4, B6324S4 only
- Volvo XC70 (2008–)2008–2009
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S2 only
- Volvo XC70 (2008–)2011–2015Engine B6304T4, B6324S4 only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2012Engine B6324S5 only
- Volvo XC90 (2003–)2013–2014All engines except: B5254T9
What does this fault code mean?
The code only shows that one or more fault codes are stored in the transmission control module (TCM) that affect emissions. The engine control module lights the malfunction indicator lamp when the transmission control module requests it.
Possible causes
- Look for the fault cause in the transmission control module (TCM)
- One or several fault codes are stored in the transmission control module (TCM)
What you can do
- 1If you have a diagnostic tool, read the fault codes in the transmission control module first, since this code only shows that they exist
- 2Clear this code once the other fault codes have been dealt with, and check whether the MIL goes out
- 3If the fault remains after these checks, have a workshop read and correct the faults in the transmission control module
Symptoms you may notice3
- Message in the display
- Malfunction indicator lamp (MIL) is lit
- Check engine light comes on or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.