VOLVO
ECM-P070407 - Clutch Switch Input Circuit. General Failure Information. Mechanical Failures
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (8)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo S80 (2007–)2010–2011Engine D4164T only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2010–2011Engine D4164T only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The code concerns a mechanical fault in the clutch pedal contact. The engine control module counts how many times the pedal is pressed, and the code is set if the clutch has not been pressed at least three times during the same drive while the vehicle speed has varied.
Possible causes
- Fault-trace the central electronic module (CEM)
What you can do
- 1Read and clear the fault code, and test-drive to see whether it returns
- 2Check that the clutch pedal moves freely and does not stick
- 3If you have a diagnostic tool, read the clutch pedal position in live data and check that the value changes when the pedal is pressed
- 4If the fault remains, have a workshop read and correct the fault in the central electronic module (CEM)
Symptoms you may notice3
- Cruise control cannot be engaged
- Autostart does not work
- Warning symbol and text message in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.