VOLVO
ECM-P080600 - Clutch Position Sensor Circuit Range/Performance. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
3 modelsS60 (2011–), S80 (2007–), V70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2011–2012Engine B5254T5 only
- Volvo S80 (2007–)2007–2008Engine B5254T6 only
- Volvo S80 (2007–)2009Engine B5254T6, B5254T8 only
- Volvo S80 (2007–)2010–2011Engine B5254T10, B5254T11, B5254T8 only
- Volvo S80 (2007–)2012Engine B5254T10 only
- Volvo V70 (2008–)2008Engine B5254T6 only
- Volvo V70 (2008–)2009Engine B5254T6, B5254T8 only
- Volvo V70 (2008–)2010–2011Engine B5254T10, B5254T11 only
- Volvo V70 (2008–)2012Engine B5254T10 only
What does this fault code mean?
The engine control module (ECM) compares the signals from the clutch pedal position sensor and position switch and checks that they are reasonable. The code is set when one of the two signals lies outside its permitted range. It does not say what type of fault it is, only that the signals do not agree.
Possible causes
- Position switch incorrectly fitted, misadjusted or sticking
- Contact resistance, oxidation or loose connection in the connector
- Faulty position switch
What you can do
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Try starting, auto-start and cruise control with the buttons and controls to see whether any of the symptoms can be reproduced
- 3Check that the clutch pedal moves freely and does not stick, and that the position sensor and position switch are firmly fixed and correctly adjusted
- 4Check that the connectors at the position sensor and position switch are firmly seated and free from oxidation and corrosion
- 5If you have a diagnostic tool, compare live data for the position sensor and switch as the pedal is pressed and released; they should agree
- 6Have a workshop carry out a more detailed check of the position sensor and position switch if these checks are not enough
Symptoms you may notice2
- Starting and auto-start do not work
- Cruise control and its disengagement do not work
General guidance for car owners. Diagnosis on the car can point to a different cause.