Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P080800
    VOLVO

    ECM-P080800 - Clutch Position Sensor "A" Circuit High. General Failure Information. No sub type information

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    6 models

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)

    Show models by year and engine (6)
    • Volvo S60 (2011–)2011–2015Engine D4162T only
    • Volvo S80 (2007–)2012–2015Engine D4162T only
    • Volvo V40 (2013–)2013–2015Engine D4162T only
    • Volvo V40 Cross Country (2013–)2013–2015Engine D4162T only
    • Volvo V60 (2011–)2011–2015Engine D4162T only
    • Volvo V70 (2008–)2012–2015Engine D4162T only

    What does this fault code mean?

    The engine control module (ECM) keeps watch on the clutch pedal with the position sensor and checks it against the pedal switch. The code is set when the position sensor signal, sent over CAN, lies above the permitted range for longer than allowed.

    Possible causes

    • Loose contact, oxidation or contact resistance in the connector
    • Damaged signal wire
    • Damaged clutch pedal sensor
    • Damaged clutch pedal position sensor

    What you can do

    1. 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
    2. 2Try starting, auto-start and automatic stop-start with the buttons and controls to see whether the symptoms can be reproduced
    3. 3Read off and note the fault code, erase it and take the car for a test drive to see whether it returns
    4. 4Check that the connectors at the position sensor and pedal switch are firmly seated and free from oxidation
    5. 5Check that the wiring to the position sensor has no chafing, crush damage or loose clips, especially where the cable moves
    6. 6If you have a diagnostic tool, read live data for the position sensor while pressing and releasing the pedal, and check that the value follows the pedal movement

    Symptoms you may notice3

    • Starting and auto-start do not work
    • Automatic engine stop-start does not work, both at idle and while driving
    • The car may hesitate, surge or run jerkily while driving, even at constant speed

    What the fault can affect1

    • The automatic engine stop-start function is switched off

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.