VOLVO
ECM-P083023 - Clutch Pedal Switch A Circuit. General Signal Failures. Signal stuck low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
3 modelsC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
What does this fault code mean?
The code concerns clutch pedal switch A, where the signal from the switch is missing while the engine is running. It is an information code that never appears on its own, but together with another fault code, which should be investigated first.
Possible causes
- Fault on the CAN network
- The cause is the other fault code stored at the same time
What you can do
- 1Read off all stored fault codes, including those in other control modules, and note which are stored together with this code
- 2This code is a knock-on fault: investigate the other fault code first, then erase this one
- 3If CAN-related fault codes are stored, investigate them first, as the CAN network may be the cause
- 4Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.