VOLVO
ECM-P085023 - Park / Neutral Switch Input Circuit. General Signal Failures. Signal stuck low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (32)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012, 2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013–2014Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011–2012Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2013–2014Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B5204T9, B6304T4 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2014Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2015Engine B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The engine control module (ECM) compares the signal from the gear selector's directly connected wire with the signal over CAN from the transmission control module (TCM). The code is set when the wire indicates that starting is allowed while the CAN signal indicates the opposite. The fault is checked with the ignition in position II.
Possible causes
- The root cause is in the transmission control module (TCM)
What you can do
- 1Read the fault codes in the transmission control module (TCM) first, as the root cause is there
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3Where possible, check functions on a test drive, such as starting and auto-start, to establish the status of the fault
- 4If you have a diagnostic tool, check in live data whether the gear position used by the ECM changes when you move the selector between P/N and other positions
- 5If the fault remains, have a workshop investigate the transmission control module (TCM) and the wire from the gear selector
Symptoms you may notice4
- Auto-start is lost or does not work
- Engine starting is delayed or hesitant
- The engine is hard to start and cranks slowly, sometimes or always
- The engine does not start, sometimes or always
What the fault can affect1
- The ECM uses the signal received over CAN instead
General guidance for car owners. Diagnosis on the car can point to a different cause.