Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P08B200
    VOLVO

    ECM-P08B200 - Neutral Position Sensor "A"/"B" Correlation. General Failure Information. No sub type information

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    11 models

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (29)
    • Volvo C30 (2007–2013)2011–2013Engine D4162T only
    • Volvo S40 (2004–2013)2011–2012Engine D4162T only
    • Volvo S60 (2011–)2011Engine B4164T, B4164T3, D4162T only
    • Volvo S60 (2011–)2012All engines except: B4204T7, B5254T5, B6304T4
    • Volvo S60 (2011–)2013–2014All engines except: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
    • Volvo S60 (2011–)2015All engines except: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
    • Volvo S80 (2007–)2011Engine B4164T only
    • Volvo S80 (2007–)2012Engine B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15 only
    • Volvo S80 (2007–)2013Engine B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15 only
    • Volvo S80 (2007–)2014All engines except: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2015All engines except: B6304T4, B6324S4, B6324S5
    • Volvo V40 (2013–)2013–2014All engines except: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 (2013–)2015All engines except: B5204T8, B5204T9
    • Volvo V40 Cross Country (2013–)2013–2014Engine B4164T, D4162T, D5204T4, D5204T6 only
    • Volvo V40 Cross Country (2013–)2015All engines except: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V50 (2004–2013)2011–2012Engine D4162T only
    • Volvo V60 (2011–)2011Engine B4164T, B4164T3, D4162T only
    • Volvo V60 (2011–)2012All engines except: B4204T7, B6304T4
    • Volvo V60 (2011–)2013All engines except: B4204T7, B5204T8, B5204T9, B6304T4, D82PHEV
    • Volvo V60 (2011–)2014All engines except: B4204T7, B5204T8, B5204T9, B5254T12, B6304T4, D82PHEV
    • Volvo V60 (2011–)2015All engines except: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D82PHEV, D87PHEV
    • Volvo V70 (2008–)2011Engine B4164T only
    • Volvo V70 (2008–)2012All engines except: B4204T7, B5254T10, B6304T4, B6324S5
    • Volvo V70 (2008–)2013–2014All engines except: B4204T7, B5204T9, B6304T4, B6324S5
    • Volvo V70 (2008–)2015All engines except: B5204T9, B6304T4
    • Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
    • Volvo XC60 (2009–)2013–2014All engines except: B4204T7, B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2015All engines except: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2012–2015All engines except: B6304T4, B6324S4, B6324S5

    What does this fault code mean?

    The two signals from the neutral position sensors, A and B, do not agree with each other. The engine control module compares them while automatic stop-start is active, and the fault is checked with the ignition on and the engine running.

    Possible causes

    • Loose contact or oxidation in the connector
    • Signal wire shorted to earth, or with a break in it
    • Short to earth in the connector
    • Damaged neutral position sensor
    • Magnet damaged or in the wrong position

    What you can do

    1. 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
    2. 2Check that the connectors at the neutral position sensors are firmly seated and free from looseness and oxidation
    3. 3Use a multimeter to check that the signal wires to the sensors have no break and are not shorted to earth (the body)
    4. 4Check that the sensors are correctly fitted to the gearbox and that the magnet is not damaged or displaced
    5. 5If you have a diagnostic tool, check in live data that the two sensor values change together as the gear lever is moved
    6. 6If the fault remains, have a workshop investigate the sensors and their wiring

    Symptoms you may notice3

    • Automatic engine stop-start does not work while driving
    • Automatic engine stop-start does not work at idle
    • Starting and auto-start do not work

    What the fault can affect1

    • The automatic engine stop-start function is switched off

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.