VOLVO
ECM-P0CF100 - Hybrid/EV Electronics Coolant Pump Control Circuit High. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
1 modelV60 (2011–)
Show models by year and engine (2)
What does this fault code mean?
Although the code is named coolant pump control circuit high, it concerns the coolant circuit temperature sensor, and the condition is that the signal wire to the sensor is shorted or has a break.
Possible causes
- Damaged temperature sensor
- Short circuit or break in the wiring to the temperature sensor
What you can do
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Where possible, check that HYBRID mode works normally on a test drive
- 3Read off the fault code with the ignition on and check whether it is active
- 4Have a workshop check the sensor and its wiring. Do not work on the hybrid system yourself
Symptoms you may notice3
- The combustion engine is active in HYBRID mode more often than normal, or all the time
- The electric cooling fan runs all the time while the engine is running
- A message and a warning symbol are shown in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.