Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P113100
    VOLVO

    ECM-P113100 - Lack Of HO2S11 Switches - Sensor Indicates Lean. General Failure Information. No sub type information

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    9 models

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Show models by year and engine (11)
    • Volvo C30 (2007–2013)2011–2013Engine D4162T only
    • Volvo S40 (2004–2013)2011–2012Engine D4162T only
    • Volvo S60 (2011–)2011–2015Engine D4162T only
    • Volvo S80 (2007–)2008–2011Engine B4204S3, B4204S4 only
    • Volvo S80 (2007–)2012–2015Engine D4162T only
    • Volvo V40 (2013–)2013–2015Engine D4162T only
    • Volvo V40 Cross Country (2013–)2013–2015Engine D4162T only
    • Volvo V50 (2004–2013)2011–2012Engine D4162T only
    • Volvo V60 (2011–)2011–2015Engine D4162T only
    • Volvo V70 (2008–)2008–2011Engine B4204S3, B4204S4 only
    • Volvo V70 (2008–)2012–2015Engine D4162T only

    What does this fault code mean?

    The ECM checks whether the front oxygen sensor (bank 1) switches between lean and rich at a reasonable rate. The code is set when the signal changes too seldom or not at all, meaning the sensor wrongly shows a lean mixture. Because the check only runs under certain driving conditions, a test drive may be needed before the fault can be judged.

    Possible causes

    • Air leak in the intake pipe
    • Damaged front oxygen sensor (bank 1)
    • Oxygen sensor is incorrectly fitted
    • Oxygen sensor is damaged

    What you can do

    1. 1Look for air leaks in the intake pipe, for example at hoses and connections
    2. 2Check that the oxygen sensor is correctly fitted and that its connector is firmly seated
    3. 3If you have a diagnostic tool: follow the oxygen sensor signal in live data during a test drive and see whether it switches between rich and lean
    4. 4If you find no fault in the intake, sensor or connector: have a workshop replace the oxygen sensor

    Symptoms you may notice1

    • Malfunction indicator (MIL) lamp is lit

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.