Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P113700
    VOLVO

    ECM-P113700 - Lack Of HO2S12 Switches - Sensor Indicates Lean. General Failure Information. No sub type information

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    4 models

    S80 (2007–), V70 (2008–), XC70 (2008–), XC90 (2003–)

    Show models by year and engine (9)
    • Volvo S80 (2007–)2007Engine B6324S, B8444S only
    • Volvo S80 (2007–)2008Engine B4204S3, B4204S4, B6324S only
    • Volvo S80 (2007–)2009–2011Engine B4204S3, B4204S4 only
    • Volvo V70 (2008–)2008Engine B4204S3, B4204S4, B6324S only
    • Volvo V70 (2008–)2009–2011Engine B4204S3, B4204S4 only
    • Volvo XC70 (2008–)2008Engine B6324S only
    • Volvo XC90 (2003–)2005–2006Engine B8444S only
    • Volvo XC90 (2003–)2007Engine B6324S, B8444S only
    • Volvo XC90 (2003–)2008Engine B6324S only

    What does this fault code mean?

    The ECM continuously monitors the voltage of the rear oxygen sensor on bank 1, which is the cylinder row at the front with cylinders 1, 3, 5 and 7. The code is set when the voltage falls outside the range the ECM accepts, or when the sensor wrongly shows a lean mixture.

    Possible causes

    • Contact resistance or oxidation in the connections
    • Signal wire shorted to ground
    • Broken signal wire
    • Damaged rear oxygen sensor on bank 1
    • Air leak in the intake pipe

    What you can do

    1. 1If you have a diagnostic tool: start the engine, let it idle for a while, then read the fault status. Malfunction found means the fault is present now
    2. 2Do not use rust solvent spray or grease in the oxygen sensor connector, and check that it is firmly seated and free from oxidation
    3. 3Inspect the signal wire for chafing, and use a multimeter to check that it is unbroken and has no contact with ground
    4. 4Look for air leaks in the intake pipe, for example at hoses and connections
    5. 5If you find nothing above: try a new rear oxygen sensor, or have a workshop replace it

    Symptoms you may notice1

    • Malfunction indicator (MIL) lamp is lit

    What the fault can affect1

    • Control of the rear oxygen sensor is switched off

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.