VOLVO
ECM-P115E97 - Throttle Actuator Control Throttle Body Air Flow Trim at Max Limit. Component Failures. Component or system operation obstructed or blocked
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The engine control module (ECM) works out how much air the engine should receive and compares that with what the mass airflow meter measures. The code is set when the predicted airflow exceeds the measured airflow, which can be caused by a leak, dirt in the throttle body or a blocked intake.
Possible causes
- Air leak in the intake system
- Dirty throttle body
- Blocked intake system
- Damaged mass airflow meter
What you can do
- 1Check the mass airflow meter connector for oxidation and loose connections
- 2Look for leaks in the intake system, especially in the hoses between the mass airflow meter and the throttle unit
- 3Look inside the throttle body for dirt. A dirty throttle body reduces the airflow to the engine, which can cause codes or symptoms
- 4Clean the throttle body carefully if needed
- 5If you find no fault: fit a new mass airflow meter, or have a workshop do it
Symptoms you may notice1
- Uneven idle
General guidance for car owners. Diagnosis on the car can point to a different cause.