VOLVO
ECM-P117068 - Engine Shut Off Solenoid. Algorithm Based Failures. Event information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (27)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B6324S2 only
- Volvo S80 (2007–)2011–2015Engine B6324S4 only
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B6324S2 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S2 only
- Volvo XC60 (2009–)2011–2014Engine B6304T4, B6324S4 only
- Volvo XC60 (2009–)2015Engine B5204T9, B5254T12, B5254T14, B6304T4, B6324S4 only
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6324S2 only
- Volvo XC70 (2008–)2011–2015Engine B6324S4 only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
This is an event-controlled code, meant as information, and it does not indicate a fault in the control module where it is active. Although the code is named as an engine shut-off solenoid fault, it concerns the front oxygen sensor (bank 1). It is set when lambda reads too low or too high for a while. The code can be caused by overfilling the fuel tank.
Possible causes
- The fuel tank has been overfilled
- Liquid fuel can then enter the EVAP hoses and get pulled into the engine when the EVAP valve opens and venting occurs, which briefly gives the engine too much fuel
What you can do
- 1The code does not need a repair in itself, so you do not need to look for a fault for it
- 2Consider whether the tank was filled above normal level at the last refuelling, since that may be the cause
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.