VOLVO
ECM-P134600 - Fuel Level Sensor B Circuit. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (22)
- Volvo S60 (2011–)2011–2014Engine B6304T4 only
- Volvo S60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo V60 (2011–)2011–2014Engine B6304T4 only
- Volvo V60 (2011–)2015Engine B6304T3, B6304T4, B6304T5 only
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011–2014Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B6304T4 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The central electronic module (CEM) detects a fault on the ejector part of the fuel level sensor and sends a fault message to the engine control module (ECM), which then sets the code. The code is therefore a knock-on fault, and the root fault is in the CEM.
Possible causes
- The cause of the fault is in the central electronic module (CEM)
What you can do
- 1Read the codes in the central electronic module (CEM), because the root fault is stored there.
- 2Remedy the root fault in the CEM and then clear the code there.
- 3Then clear the code in the engine control module (ECM). It cannot be cleared until the root fault has been remedied.
- 4If nothing is found in the CEM, have a workshop with diagnostic equipment check the ejector part of the fuel level sensor and its wiring.
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.