VOLVO
ECM-P160344 - EEPROM Malfunction. System Internal Failures. Data memory failure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The engine control module (ECM) has detected an internal fault in its data memory, the EEPROM function where the control module stores information. Electrical and magnetic interference from nearby parts may also be behind the fault.
Possible causes
- Communication interference
- Electrical and magnetic interference (EMC) from nearby components in the engine bay or from the surroundings, for example radar equipment
- Damaged engine control module (ECM)
What you can do
- 1Read off the fault codes and note which are present
- 2Switch the ignition on, wait a while and read off the status of the fault code again
- 3Check that the fault code is no longer active when the test has finished
- 4If other fault codes are stored in the engine control module, troubleshoot those first
- 5If the fault code returns: have a workshop replace the engine control module (ECM)
Symptoms you may notice2
- The engine stalls, sometimes or all the time
- The engine does not start, sometimes or all the time
General guidance for car owners. Diagnosis on the car can point to a different cause.