Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P160817
    VOLVO

    ECM-P160817 - Watchdog Malfunction. General Electrical Failures. Circuit voltage above threshold

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    12 models

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (40)
    • Volvo C30 (2007–2013)2011–2013Engine D5204T, D5204T5 only
    • Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
    • Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
    • Volvo S40 (2004–2013)2011–2012Engine D5204T, D5204T5 only
    • Volvo S60 (2011–)2011Engine D5204T2, D5244T10 only
    • Volvo S60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
    • Volvo S60 (2011–)2013–2014Engine D5204T3, D5204T7, D5244T11, D5244T15 only
    • Volvo S60 (2011–)2015Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T23 only
    • Volvo S80 (2007–)2009Engine D5244T10 only
    • Volvo S80 (2007–)2010Engine D5244T10, D5244T14, D5244T19 only
    • Volvo S80 (2007–)2011Engine D5204T2, D5244T10 only
    • Volvo S80 (2007–)2012Engine D5204T3, D5244T11, D5244T15 only
    • Volvo S80 (2007–)2013–2014Engine D5204T3, D5204T7, D5244T11, D5244T15 only
    • Volvo S80 (2007–)2015Engine D5204T3, D5244T15 only
    • Volvo V40 (2013–)2013–2014Engine D5204T4, D5204T6 only
    • Volvo V40 (2013–)2015Engine D5204T6 only
    • Volvo V40 Cross Country (2013–)2013–2014Engine D5204T4, D5204T6 only
    • Volvo V40 Cross Country (2013–)2015Engine D5204T6 only
    • Volvo V50 (2004–2013)2011–2012Engine D5204T, D5204T5 only
    • Volvo V60 (2011–)2011Engine D5204T2, D5244T10 only
    • Volvo V60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
    • Volvo V60 (2011–)2013Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV only
    • Volvo V60 (2011–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV only
    • Volvo V60 (2011–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV only
    • Volvo V70 (2008–)2009Engine D5244T10 only
    • Volvo V70 (2008–)2010Engine D5244T10, D5244T14, D5244T19 only
    • Volvo V70 (2008–)2011Engine D5204T2, D5244T10 only
    • Volvo V70 (2008–)2012Engine D5204T3, D5244T11, D5244T15 only
    • Volvo V70 (2008–)2013Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T17 only
    • Volvo V70 (2008–)2014–2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
    • Volvo XC60 (2009–)2010Engine D5244T10, D5244T14, D5244T16 only
    • Volvo XC60 (2009–)2011Engine D5204T2, D5244T10, D5244T16 only
    • Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
    • Volvo XC60 (2009–)2013All engines except: B4204T7, B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
    • Volvo XC60 (2009–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23 only
    • Volvo XC70 (2008–)2010Engine D5244T10, D5244T14, D5244T16 only
    • Volvo XC70 (2008–)2011Engine D5204T2, D5244T10, D5244T16 only
    • Volvo XC70 (2008–)2012–2013All engines except: B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2014–2015Engine D5204T3, D5244T11, D5244T12, D5244T15, D5244T17 only

    What does this fault code mean?

    The engine control module (ECM) has detected that its internal voltage level is too high. The fault concerns the control module's own internal voltage, not an outside sensor.

    Possible causes

    • A fault inside the engine control module (ECM) itself

    What you can do

    1. 1Check the battery charge and that the battery terminals are tight and clean
    2. 2Read off the fault codes and note which are present before clearing any
    3. 3Clear the fault code, switch the ignition on and wait a while so the control module can run its test
    4. 4Check that the fault code is no longer active when the test has finished. If it is gone, the fault may have been temporary
    5. 5If the fault code returns: have a workshop replace the engine control module (ECM)

    Symptoms you may notice1

    • No noticeable symptoms for the driver

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.