VOLVO
ECM-P164200 - CAN Link Circuit. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Show models by year and engine (9)
- Volvo C30 (2007–2013)2011–2013Engine D4162T only
- Volvo S40 (2004–2013)2011–2012Engine D4162T only
- Volvo S60 (2011–)2011–2015Engine D4162T only
- Volvo S80 (2007–)2012–2015Engine D4162T only
- Volvo V40 (2013–)2013–2015Engine D4162T only
- Volvo V40 Cross Country (2013–)2013–2015Engine D4162T only
- Volvo V50 (2004–2013)2011–2012Engine D4162T only
- Volvo V60 (2011–)2011–2015Engine D4162T only
- Volvo V70 (2008–)2012–2015Engine D4162T only
What does this fault code mean?
The engine control module (ECM) has registered faults in the torque request from the brake control module (BCM), which is sent over the CAN link. The fault can lead to limited engine torque. The code is a general description and does not state what type of fault it is.
Possible causes
- Faulty software
- Damaged engine control module (ECM)
What you can do
- 1Read off the fault codes, note which are present and clear the fault code
- 2Drive the car and read off the fault codes again afterwards. Check that the fault code is no longer active
- 3If the fault code returns: have a workshop check the software in the engine control module and replace the module if the fault remains
Symptoms you may notice2
- A text message and a warning symbol appear in the display
- The engine performs poorly and lacks power while driving
What the fault can affect1
- Engine torque may be limited
General guidance for car owners. Diagnosis on the car can point to a different cause.