VOLVO
ECM-P165748 - CAN Link Chip Malfunction. System Internal Failures. Supervision software failure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
13 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (46)
- Volvo C30 (2007–2013)2011–2013Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo S60 (2011–)2011Engine D5204T2, D5244T10 only
- Volvo S60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013–2014Engine D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S60 (2011–)2015Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T23 only
- Volvo S80 (2007–)2007–2008Engine D5244T4, D5244T5 only
- Volvo S80 (2007–)2009Engine D5244T10, D5244T4, D5244T5 only
- Volvo S80 (2007–)2010Engine D4164T, D5244T10, D5244T14, D5244T19 only
- Volvo S80 (2007–)2011Engine D4164T, D5204T2, D5244T10 only
- Volvo S80 (2007–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo S80 (2007–)2013–2014Engine D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S80 (2007–)2015Engine D5204T3, D5244T15 only
- Volvo V40 (2013–)2013–2014Engine D5204T4, D5204T6 only
- Volvo V40 (2013–)2015Engine D5204T6 only
- Volvo V40 Cross Country (2013–)2013–2014Engine D5204T4, D5204T6 only
- Volvo V40 Cross Country (2013–)2015Engine D5204T6 only
- Volvo V50 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo V60 (2011–)2011Engine D5204T2, D5244T10 only
- Volvo V60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV only
- Volvo V70 (2008–)2008Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2009Engine D5244T10, D5244T4, D5244T5 only
- Volvo V70 (2008–)2010Engine D4164T, D5244T10, D5244T14, D5244T19 only
- Volvo V70 (2008–)2011Engine D4164T, D5204T2, D5244T10 only
- Volvo V70 (2008–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo V70 (2008–)2013Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T17 only
- Volvo V70 (2008–)2014–2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC60 (2009–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC60 (2009–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2013All engines except: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23 only
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC70 (2008–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC70 (2008–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC70 (2008–)2012–2013All engines except: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Engine D5204T3, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The ECM checks its configuration ID against the signal setup that the central electronic module (CEM) broadcasts on the CAN network. The fault code is set if the IDs do not match or if communication between the two control modules is interrupted. Although the code is described as a supervision software fault, the condition concerns configuration and communication.
Possible causes
- Incorrect CAN configuration ID, because the engine control module is not intended for this car, for example a used unit with other software or hardware
- Break in the CAN wires between the engine control module and the CEM
What you can do
- 1Read off the fault codes, especially whether any code is stored in the central electronic module (CEM)
- 2Has a used engine control module from another car been fitted recently? The fault code may be due to it not being intended for this car
- 3Inspect the CAN wires between the engine control module and the CEM for breaks and loose connectors
- 4If the fault remains: have a workshop program the engine control module with the correct software for the car
Symptoms you may notice2
- The cruise control does not engage
- A red text message and a red warning symbol appear in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.