VOLVO
ECM-P167500 - Injector data not programmed. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (8)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo S80 (2007–)2010–2011Engine D4164T only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2010–2011Engine D4164T only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The engine control module (ECM) must have calibration values for the injectors programmed so that they match the injectors' classification. The fault code is set when the control module detects a fault in the fuel quantity adjustment, meaning the IMA programming of the injectors.
Possible causes
- IMA programming that failed or was interrupted
What you can do
- 1Read off the fault codes and note which are present
- 2If any programming of the engine control module has been interrupted or has not succeeded, that may be the cause of the fault code
- 3Have a workshop repeat the programming of the injector data in the engine control module
Symptoms you may notice3
- The engine performs poorly and lacks power, especially when pulling away from standstill
- The engine hesitates, surges or runs unevenly while driving
- A text message and a warning symbol appear in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.