VOLVO
ECM-P193400 - Vehicle Speed Signal. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (41)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D4204T5 only
- Volvo S60 (2011–)2015Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5, D4204T5 only
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2014Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4204T5 only
- Volvo S80 (2007–)2015Engine B6304T4, B6324S4, B6324S5, D4204T5 only
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9, D4204T14 only
- Volvo V40 Cross Country (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, B4204T11, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, B6304T4, D4204T5 only
- Volvo V60 (2011–)2015Engine B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011–2012Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2013Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2014Engine B5204T9, B6304T4, B6324S5, D4204T5 only
- Volvo V70 (2008–)2015Engine B5204T9, B6304T4, D4204T5 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2014Engine B6304T4, B6324S4, B6324S5, D4204T5 only
- Volvo XC60 (2009–)2015Engine B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4204T5 only
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2014–2015Engine B6304T4, B6324S4, B6324S5, D4204T5 only
- Volvo XC90 (2003–)2005–2006Engine B8444S only
- Volvo XC90 (2003–)2007–2010Engine B6324S, B8444S only
- Volvo XC90 (2003–)2011Engine B6324S5, B8444S only
- Volvo XC90 (2003–)2012–2014Engine B6324S5 only
What does this fault code mean?
The brake control module (BCM) monitors the signal from the vehicle speed sensor and informs the engine control module (ECM) over the CAN network when something is wrong. The code is stored in both the BCM and the ECM. The fault can only be detected with the engine running, and the code is set once the test conditions are met.
Possible causes
- Fault in the brake control module (BCM), where the code is stored first
- Fault in the signal from the vehicle speed sensor to the brake control module
What you can do
- 1Read off the codes in the brake control module (BCM) first and remedy them, as the code in the engine control module follows from that fault
- 2Clear the code in the engine control module only once the code in the brake control module has been cleared
- 3Check that the connectors to the brake control module are secure and free from corrosion
- 4If you have a diagnostic tool: compare the speed value in the brake control module's live data with the speedometer during a test drive and check that they follow each other
- 5If the code returns after the fault is remedied, have a workshop with diagnostic equipment investigate further
Symptoms you may notice3
- Malfunction indicator light (MIL) on
- Cruise control does not work and cannot be engaged
- Check engine warning lamp lights or behaves abnormally
What the fault can affect3
- Cruise control is switched off
- On cars with automatic transmission, the transmission control module (TCM) supplies the speed value instead
- On cars with manual transmission, the brake control module's speed value is replaced by a default value
General guidance for car owners. Diagnosis on the car can point to a different cause.