VOLVO
ECM-P200800 - Intake Manifold Runner Control Circuit/Open (Bank 1). General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine D4204T5 only
- Volvo S80 (2007–)2014–2015Engine D4204T5 only
- Volvo V40 (2013–)2015Engine D4204T14 only
- Volvo V40 Cross Country (2013–)2015Engine D4204T14 only
- Volvo V60 (2011–)2014–2015Engine D4204T5 only
- Volvo V70 (2008–)2014–2015Engine D4204T5 only
- Volvo XC60 (2009–)2014–2015Engine D4204T5 only
- Volvo XC70 (2008–)2014–2015Engine D4204T5 only
What does this fault code mean?
The engine control module (ECM) watches the output of the control module's internal power stage that drives the swirl damper motor. The code is set when that signal is incorrect, which may be caused by an open circuit in the signal cable or a damaged swirl damper motor.
Possible causes
- Open circuit on the signal cable
- Damaged swirl throttle motor
What you can do
- 1Check the signal cable to the swirl damper motor for an open circuit with a multimeter
- 2If you have a diagnostic tool: activate the swirl damper motor and check that it responds to the command
- 3Check that the connectors to the swirl damper motor are secure and free from oxidation
- 4If the fault remains, have a workshop with diagnostic equipment check the swirl damper motor and its signal cable
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.