VOLVO
ECM-P200811 - Intake Manifold Runner Control Circuit / Open (Bank 1). General Electrical Failures. Circuit short to ground
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (6)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
The engine control module (ECM) monitors the swirl throttle motor circuit and sets the code when the signal is wrong. The code concerns a short circuit to ground in the signal cable, meaning the cable is in contact with earth (the body) when it should not be.
Possible causes
- Signal cable short-circuited to ground
- Open circuit in the signal cable
- Damaged swirl throttle motor
- Swirl damper motor sticking, or the linkage and swirl damper sticking
- Damaged linkage between the swirl throttle motor and the swirl throttle duct
- Trouble code ECM-P200812 (short circuit to voltage) can cause this code
What you can do
- 1Check that the fuses are intact
- 2If you have a diagnostic tool: read the status of the code with the ignition on and see whether it returns after the repair
- 3Check the signal cable with a multimeter for a short circuit to ground, and check that the connectors are secure
- 4Check that the swirl damper and the linkage can move freely
- 5If the fault remains, have a workshop with diagnostic equipment check the swirl throttle motor
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.