VOLVO
ECM-P200A85 - Intake Manifold Runner Performance - Bank 1. Bus Signal / Message Failures. Signal above allowable range
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (6)
- Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
- Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
- Volvo XC60 (2009–)2009All engines except: B6304T2
- Volvo XC70 (2008–)2008All engines except: B6324S
- Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only
What does this fault code mean?
Although the code is named signal above allowable range, it applies when the swirl damper position is wrong. The engine control module (ECM) compares the damper position against a calculated value and sets the code when the deviation is present, which happens with the engine running.
Possible causes
- Trouble code ECM-P200A84 can cause this code
- Linkage or swirl damper sticking
- Damaged linkage between the swirl throttle motor and the swirl duct
- Swirl throttle motor sticking
What you can do
- 1Look for the control arm between the swirl motor and the swirl duct having come loose
- 2Check that the swirl motor linkage and the swirl duct are not jammed or damaged
- 3Check that the swirl throttle motor is not jammed or damaged
- 4If you have a diagnostic tool: read whether the code is still active after the arm and linkage have been checked
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.