Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P210000
    VOLVO

    ECM-P210000 - Throttle Actuator Control Motor Circuit /Open. General Failure Information. No sub type information

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    5 models

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Show models by year and engine (8)
    • Volvo S80 (2007–)2007–2009Engine D5244T4, D5244T5 only
    • Volvo S80 (2007–)2010–2011Engine D4164T only
    • Volvo V70 (2008–)2008–2009Engine D5244T4, D5244T5 only
    • Volvo V70 (2008–)2010–2011Engine D4164T only
    • Volvo XC60 (2009–)2009All engines except: B6304T2
    • Volvo XC70 (2008–)2008All engines except: B6324S
    • Volvo XC70 (2008–)2009Engine D5244T4, D5244T5 only
    • Volvo XC90 (2003–)2013–2014Engine D5244T18, D5244T5 only

    What does this fault code mean?

    The ECM drives the throttle motor through its internal power stage and monitors the inlet control valve. The code is set when the ECM detects a fault in controlling the throttle motor or in the PWM signal to the inlet control valve, or when the output stage inside the ECM becomes too hot.

    Possible causes

    • Open circuit on the signal wire
    • Signal wires short-circuited
    • Damaged throttle unit
    • Contact resistance or oxidation in the connectors
    • Overheated throttle unit
    • Open circuit in the power supply

    What you can do

    1. 1Check that the fuses are intact
    2. 2Use a multimeter to check that the wiring to the throttle unit has no open circuit or short circuit
    3. 3Check that the connectors to the throttle unit are secure and free from oxidation
    4. 4If you have a diagnostic tool: read the code status with the ignition on and check whether the fault is still active
    5. 5If the fault remains, have a workshop check the throttle unit and its control

    Symptoms you may notice4

    • The car runs with poor performance and lacks power
    • The engine hesitates, surges or runs unevenly during acceleration, deceleration or steady speed
    • Check engine warning lamp lights or behaves abnormally
    • Warning symbol and text message shown in the driver information display

    What the fault can affect1

    • Engine torque may be limited

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.