VOLVO
ECM-P212036 - Throttle/Pedal Position Sensor/Switch D Circuit. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency too low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
12 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (40)
- Volvo C30 (2007–2013)2011–2013Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo S60 (2011–)2011Engine D5204T2, D5244T10 only
- Volvo S60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013–2014Engine D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S60 (2011–)2015Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T23 only
- Volvo S80 (2007–)2009Engine D5244T10 only
- Volvo S80 (2007–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo S80 (2007–)2011Engine D5204T2, D5244T10 only
- Volvo S80 (2007–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo S80 (2007–)2013–2014Engine D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S80 (2007–)2015Engine D5204T3, D5244T15 only
- Volvo V40 (2013–)2013–2014Engine D5204T4, D5204T6 only
- Volvo V40 (2013–)2015Engine D5204T6 only
- Volvo V40 Cross Country (2013–)2013–2014Engine D5204T4, D5204T6 only
- Volvo V40 Cross Country (2013–)2015Engine D5204T6 only
- Volvo V50 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo V60 (2011–)2011Engine D5204T2, D5244T10 only
- Volvo V60 (2011–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV only
- Volvo V70 (2008–)2009Engine D5244T10 only
- Volvo V70 (2008–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo V70 (2008–)2011Engine D5204T2, D5244T10 only
- Volvo V70 (2008–)2012Engine D5204T3, D5244T11, D5244T15 only
- Volvo V70 (2008–)2013Engine D5204T3, D5204T7, D5244T11, D5244T15, D5244T17 only
- Volvo V70 (2008–)2014–2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC60 (2009–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2013All engines except: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23 only
- Volvo XC70 (2008–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC70 (2008–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC70 (2008–)2012–2013All engines except: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Engine D5204T3, D5244T11, D5244T12, D5244T15, D5244T17 only
What does this fault code mean?
The engine control module monitors the accelerator pedal position sensor. The code is set when the module finds that the PWM (pulse-width modulated) signal from the pedal sensor has too low a frequency. The fault may lie in the signal or supply wire, or in the sensor itself.
Possible causes
- An open circuit in the signal wire
- The signal wire is short-circuited to ground
- The signal wire is short-circuited to supply voltage
- The supply wire is short-circuited to ground
- The supply wire is short-circuited to supply voltage
- Damaged accelerator pedal position sensor
What you can do
- 1Check that the fuses are intact
- 2With the ignition off, check that the connectors at the pedal sensor and the engine control module are secure and free from oxidation
- 3Look for breaks and chafing in the signal and supply wires to the pedal sensor, and use a multimeter to check that they have no contact with ground or supply voltage
- 4If you have a diagnostic tool, read the accelerator pedal position in live data and check that it follows the pedal as it is pressed and released
- 5If the fault remains, have a workshop with diagnostic equipment check the pedal sensor and its wiring
Symptoms you may notice4
- A text message and a warning symbol appear in the display
- The engine hesitates or surges, and it is unclear when
- The engine hesitates or jerks during acceleration
- The engine hesitates or jerks during deceleration
General guidance for car owners. Diagnosis on the car can point to a different cause.