VOLVO
ECM-P215B62 - Vehicle Speed / Output Shaft Speed Correlation. Algorithm Based Failures. Signal compare failure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The ECM checks the main speed value from brake control (BCM) against the reference from transmission control (TCM). The code is set when the main value strays too far from the reference. The fault lies in the signal that TCM sends, and the code can only be erased once the TCM fault is fixed.
Possible causes
- Faulty speed signal from transmission control (TCM)
What you can do
- 1Read the fault codes in the transmission control module (TCM) first, since the root fault is there
- 2Fix the fault in TCM and then erase the code in the engine control module
- 3Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 4With a diagnostic tool, compare the TCM and BCM speed values in live data while the car is rolling
- 5Check the connectors at the engine control module and the transmission control module for loose connections and oxidation
- 6Road test the car after the repair and check that the idle is smooth and that the code does not return
Symptoms you may notice1
- Uneven idle
General guidance for car owners. Diagnosis on the car can point to a different cause.