VOLVO
ECM-P217592 - Throttle Actuator Control System - Low Airflow Detected. Component Failures. Performance or incorrect operation
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The engine control module (ECM) works out the air mass the engine should receive and compares it with the reading from the mass air flow sensor. The code is set when the estimate comes out below the measured value. The fault may lie in a leak in the intake, a blocked or dirty intake system, or the MAF sensor.
Possible causes
- Air leakage in the intake system
- Contaminated throttle body
- Blocked intake system
- Damaged mass air flow (MAF) sensor
What you can do
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Check the intake hoses for cracks and loose clamps, since an air leak can cause this code
- 3Check that the air filter and intake hoses are not blocked by objects or dirt
- 4Clean the throttle body when needed if it is contaminated
- 5With a diagnostic tool, read the air mass in live data at idle and check whether the value is steady
- 6Have a workshop with diagnostic equipment check the mass air flow sensor if the fault remains after these checks
Symptoms you may notice2
- The malfunction indicator lamp lights up or behaves abnormally
- The idle is uneven
General guidance for car owners. Diagnosis on the car can point to a different cause.