Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P217722
    VOLVO

    ECM-P217722 - System Too Lean Off Idle - Bank 1. General Signal Failures. Signal too high

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    3 models

    S60 (2011–), S80 (2007–), V70 (2008–)

    Show models by year and engine (9)
    • Volvo S60 (2011–)2011–2012Engine B5254T5 only
    • Volvo S80 (2007–)2007–2008Engine B5254T6 only
    • Volvo S80 (2007–)2009Engine B5254T6, B5254T8 only
    • Volvo S80 (2007–)2010–2011Engine B5254T10, B5254T11, B5254T8 only
    • Volvo S80 (2007–)2012Engine B5254T10 only
    • Volvo V70 (2008–)2008Engine B5254T6 only
    • Volvo V70 (2008–)2009Engine B5254T6, B5254T8 only
    • Volvo V70 (2008–)2010–2011Engine B5254T10, B5254T11 only
    • Volvo V70 (2008–)2012Engine B5254T10 only

    What does this fault code mean?

    The engine control module (ECM) adjusts injection from the lambda sensor reading. The code is set when that adjustment has to be made close to its maximum in the lower or upper part-load range, and the signal is too high. The fault may lie in the fuel, a leak in the exhaust system, the fuel pressure, the lambda sensor or the injectors.

    Possible causes

    • Too high an ethanol content in the fuel
    • Air leakage in the exhaust system
    • Low fuel pressure
    • Damaged heated oxygen sensor (HO2S)
    • Damaged or incorrect type of injectors
    • Incorrectly calculated ethanol content

    What you can do

    1. 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    2. 2Check the exhaust system for air leakage
    3. 3Have a workshop measure the fuel pressure and check that it is not too low
    4. 4Think back on how the car has been refuelled; if the fuel may have too high an ethanol content, have a workshop check the ethanol calculation
    5. 5Check that the injectors do not leak, and have a workshop do this if you lack the right equipment
    6. 6Replace the lambda sensor if nothing above cures the fault, since a damaged lambda sensor can also set this code

    Symptoms you may notice4

    • The malfunction indicator lamp (MIL) is lit
    • The car hesitates or surges when accelerating
    • The idle is uneven
    • The engine does not start and only cranks

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.