VOLVO
ECM-P222764 - Barometric Pressure Circuit Range/Performance. Algorithm Based Failures. Signal plausibility failure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
3 modelsS60 (2011–), S80 (2007–), V70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2011–2012Engine B5254T5 only
- Volvo S80 (2007–)2007–2008Engine B5254T6 only
- Volvo S80 (2007–)2009Engine B5254T6, B5254T8 only
- Volvo S80 (2007–)2010–2011Engine B5254T10, B5254T11, B5254T8 only
- Volvo S80 (2007–)2012Engine B5254T10 only
- Volvo V70 (2008–)2008Engine B5254T6 only
- Volvo V70 (2008–)2009Engine B5254T6, B5254T8 only
- Volvo V70 (2008–)2010–2011Engine B5254T10, B5254T11 only
- Volvo V70 (2008–)2012Engine B5254T10 only
What does this fault code mean?
The module uses its own calculation to judge whether the reading from its built-in atmospheric pressure sensor is reasonable. The code is set when the reading is judged implausible, and the fault lies in the control module.
Possible causes
- Damaged engine control module (ECM)
What you can do
- 1Read the code, note it and clear it. Then drive the car and read again to see whether it returns
- 2If you have a diagnostic tool: read the air pressure value in live data with the ignition on and check that it is reasonable for where the car is standing
- 3Check that the fuses for the engine control are intact
- 4If the code returns, the engine control module should be replaced. Have a workshop do the job
Symptoms you may notice1
- Malfunction indicator lamp (MIL) lit
What the fault can affect1
- The engine control uses a fixed fallback value for normal sea-level air pressure instead
General guidance for car owners. Diagnosis on the car can point to a different cause.