VOLVO
ECM-P222900 - Barometric Pressure Sensor A Circuit High. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
12 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (41)
- Volvo C30 (2007–2013)2011–2013Engine D4162T, D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D4162T, D5204T, D5204T5 only
- Volvo S60 (2011–)2011Engine D4162T, D5204T2, D5244T10 only
- Volvo S60 (2011–)2012Engine D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013–2014Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S60 (2011–)2015Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23 only
- Volvo S80 (2007–)2009Engine D5244T10 only
- Volvo S80 (2007–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo S80 (2007–)2011Engine D5204T2, D5244T10 only
- Volvo S80 (2007–)2012Engine D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo S80 (2007–)2013–2014Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S80 (2007–)2015Engine D4162T, D5204T3, D5244T15 only
- Volvo V40 (2013–)2013–2014Engine D4162T, D5204T4, D5204T6 only
- Volvo V40 (2013–)2015Engine D4162T, D5204T6 only
- Volvo V40 Cross Country (2013–)2013–2014Engine D4162T, D5204T4, D5204T6 only
- Volvo V40 Cross Country (2013–)2015Engine D4162T, D5204T6 only
- Volvo V50 (2004–2013)2011–2012Engine D4162T, D5204T, D5204T5 only
- Volvo V60 (2011–)2011Engine D4162T, D5204T2, D5244T10 only
- Volvo V60 (2011–)2012Engine D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2014Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2015Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV only
- Volvo V70 (2008–)2009Engine D5244T10 only
- Volvo V70 (2008–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo V70 (2008–)2011Engine D5204T2, D5244T10 only
- Volvo V70 (2008–)2012Engine D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo V70 (2008–)2013Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17 only
- Volvo V70 (2008–)2014Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo V70 (2008–)2015All engines except: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC60 (2009–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2013All engines except: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23 only
- Volvo XC70 (2008–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC70 (2008–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC70 (2008–)2012–2013All engines except: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Engine D5204T3, D5244T11, D5244T12, D5244T15, D5244T17 only
What does this fault code mean?
The engine control module (ECM) continuously judges whether the signal from its built-in air pressure sensor is plausible. The code is set when that signal is faulty, here too high. The fault lies in the control module, and it is checked with the ignition on.
Possible causes
- Internal fault inside the module
- Damaged engine control module (ECM)
What you can do
- 1Read the code, note it and clear it. Then drive the car and read again to see whether it returns
- 2Check that the fuses for the engine control are intact
- 3If you have a diagnostic tool: have the module run its internal test for the code and read the status when the test is complete
- 4If the code returns, the engine control module should be replaced. Have a workshop do the replacement
Symptoms you may notice1
- Check engine lamp comes on or behaves abnormally
What the fault can affect3
- The engine control uses the intake manifold sensor value if it is fault-free, otherwise a fixed value
- Exhaust gas recirculation (EGR) control is lost
- Burning of soot particles does not take place
General guidance for car owners. Diagnosis on the car can point to a different cause.