VOLVO
ECM-P227995 - Intake Air System Leak. Component Failures. Incorrect assembly
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The engine control module (ECM) compares the ratio between the charge pressure before the throttle and the air pressure after the throttle. The code is set when the ratio becomes incorrect. An air leak between the turbocharger and the throttle unit, or a charge pressure sensor that is not fitted correctly, may cause this.
Possible causes
- Air leak between the turbocharger and the throttle unit
- Charge pressure sensor fitted incorrectly or come loose
- Damaged air pressure sensor in the intake manifold
What you can do
- 1Clear the code, drive the car and read again to see whether it returns
- 2Check that the charge pressure sensor is fitted correctly and has not come loose
- 3Look for an air leak in the intake system between the turbocharger and the throttle unit
- 4If nothing is found, try a new charge pressure sensor
- 5If the fault remains, have a workshop diagnose further
Symptoms you may notice1
- Poor performance and lack of power
What the fault can affect1
- Boost pressure is lower than normal
General guidance for car owners. Diagnosis on the car can point to a different cause.