VOLVO
ECM-P228300 - Injector Control Pressure Sensor Circuit. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo S80 (2007–)2014–2015Engine B4204T11, B4204T12, B4204T15 only
- Volvo V40 (2013–)2015Engine B4204T11 only
- Volvo V40 Cross Country (2013–)2015Engine B4204T11 only
- Volvo V60 (2011–)2014–2015Engine B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo V70 (2008–)2014–2015Engine B4204T11 only
- Volvo XC60 (2009–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11 only
What does this fault code mean?
The module reads the real injection timing and checks it against the requested value. The code is set when the two differ. The fault may lie in the control module or in a damaged nozzle in the injector.
Possible causes
- Internal fault in the control module
- Damaged nozzle in the injector
What you can do
- 1Clear the code, drive the car and read again to see whether it returns
- 2If the code comes back, a workshop with diagnostic equipment needs to decide whether a damaged injector nozzle or an internal fault in the control module is responsible
Symptoms you may notice1
- Check engine lamp comes on or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.