VOLVO
ECM-P240700 - Evaporative Emission System Leak Detection Pump Sense Circuit Intermittent/Erratic. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (40)
- Volvo S60 (2011–)2011–2012Engine B5254T5, B6304T4 only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2014Engine B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B4204T11, B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011–2013Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2014Engine B4204T11, B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B4204T11, B6304T4 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2015All engines except: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11, B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2005–2006Engine B8444S only
- Volvo XC90 (2003–)2007–2010Engine B6324S, B8444S only
- Volvo XC90 (2003–)2011Engine B6324S5, B8444S only
- Volvo XC90 (2003–)2012–2014Engine B6324S5 only
What does this fault code mean?
The fault is stored as intermittent/erratic, meaning it comes and goes and does not have to be present right now. The engine control module (ECM) measures the current through the leakage diagnosis pump while the leak diagnostic runs. If the current trace is erratic, the control module assumes the reference reading was wrong, and the code is set.
Possible causes
- Dirt or moisture in the pump
- Damaged heating element in the pump
- Damaged leakage diagnosis pump
What you can do
- 1Check that the relevant fuses are intact; their locations are shown in the car's owner's manual
- 2Read and clear the code, then see whether it returns when the leak diagnostic is run again
- 3Check the connector to the leak diagnostic unit for loose contacts and signs of oxidation
- 4Check the hoses and connections on the leak diagnostic unit, canister and filler pipe for damage or loose fitting
- 5Have a workshop check the engine control module software first; an upgrade can cure the code, and 2007–2008 cars should be checked
- 6If the fault returns, have a workshop with diagnostic equipment decide whether the leak diagnostic unit needs replacing
Symptoms you may notice3
- The engine warning lamp (Check engine) lights up or behaves abnormally
- The malfunction indicator lamp lights up
- A warning symbol and a text message appear in the display
What the fault can affect1
- The leakage diagnosis is interrupted
General guidance for car owners. Diagnosis on the car can point to a different cause.