Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P245321
    VOLVO

    ECM-P245321 - Diesel Particulate Filter Pressure Sensor "A" Circuit Range/Performance. General Signal Failures. Signal too low

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    8 models

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (8)
    • Volvo S60 (2011–)2014–2015Engine D4204T5 only
    • Volvo S80 (2007–)2014–2015Engine D4204T5 only
    • Volvo V40 (2013–)2015Engine D4204T14 only
    • Volvo V40 Cross Country (2013–)2015Engine D4204T14 only
    • Volvo V60 (2011–)2014–2015Engine D4204T5 only
    • Volvo V70 (2008–)2014–2015Engine D4204T5 only
    • Volvo XC60 (2009–)2014–2015Engine D4204T5 only
    • Volvo XC70 (2008–)2014–2015Engine D4204T5 only

    What does this fault code mean?

    Although the code is named signal too low, it applies when the signal from the particle filter pressure sensor is incorrect. The engine control module (ECM) measures the pressure upstream and downstream of the filter and checks the signal against a calculated value. The fault may lie in the hoses, which can be loose, pinched or swapped, or in the sensor itself.

    Possible causes

    • Loose hoses between the pressure sensor and the particle filter
    • Pinched or folded hoses between the pressure sensor and the particle filter
    • Hoses or pipes to the pressure sensor have been swapped
    • Damaged particle filter pressure sensor

    What you can do

    1. 1Look at the hoses between the pressure sensor and the particle filter for loose, pinched or folded sections
    2. 2Make sure the hoses to the pressure sensor are not swapped round
    3. 3Check that the connections at the pressure sensor are firmly seated and free from contact resistance and oxidation
    4. 4If you have a diagnostic tool, read the pressure sensor signal in live data with the engine running and see whether the value is reasonable
    5. 5Have a workshop reset the adaptation; if the fault remains after a new service regeneration, the filter may need replacing

    Symptoms you may notice1

    • The engine warning lamp (Check engine) lights up or behaves abnormally

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.