VOLVO
ECM-P245400 - Diesel Particulate Filter Pressure Sensor A Circuit Low. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
12 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (41)
- Volvo C30 (2007–2013)2011–2013Engine D4162T, D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D4162T, D5204T, D5204T5 only
- Volvo S60 (2011–)2011Engine D4162T, D5204T2, D5244T10 only
- Volvo S60 (2011–)2012Engine D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013–2014Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S60 (2011–)2015Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23 only
- Volvo S80 (2007–)2009Engine D5244T10 only
- Volvo S80 (2007–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo S80 (2007–)2011Engine D5204T2, D5244T10 only
- Volvo S80 (2007–)2012Engine D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo S80 (2007–)2013–2014Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15 only
- Volvo S80 (2007–)2015Engine D4162T, D5204T3, D5244T15 only
- Volvo V40 (2013–)2013–2014Engine D4162T, D5204T4, D5204T6 only
- Volvo V40 (2013–)2015Engine D4162T, D5204T6 only
- Volvo V40 Cross Country (2013–)2013–2014Engine D4162T, D5204T4, D5204T6 only
- Volvo V40 Cross Country (2013–)2015Engine D4162T, D5204T6 only
- Volvo V50 (2004–2013)2011–2012Engine D4162T, D5204T, D5204T5 only
- Volvo V60 (2011–)2011Engine D4162T, D5204T2, D5244T10 only
- Volvo V60 (2011–)2012Engine D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2014Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV only
- Volvo V60 (2011–)2015Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV only
- Volvo V70 (2008–)2009Engine D5244T10 only
- Volvo V70 (2008–)2010Engine D5244T10, D5244T14, D5244T19 only
- Volvo V70 (2008–)2011Engine D5204T2, D5244T10 only
- Volvo V70 (2008–)2012Engine D4162T, D5204T3, D5244T11, D5244T15 only
- Volvo V70 (2008–)2013Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17 only
- Volvo V70 (2008–)2014Engine D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo V70 (2008–)2015All engines except: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC60 (2009–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC60 (2009–)2012Engine D5204T3, D5244T11, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2013All engines except: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17 only
- Volvo XC60 (2009–)2015Engine D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23 only
- Volvo XC70 (2008–)2010Engine D5244T10, D5244T14, D5244T16 only
- Volvo XC70 (2008–)2011Engine D5204T2, D5244T10, D5244T16 only
- Volvo XC70 (2008–)2012–2013All engines except: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Engine D5204T3, D5244T11, D5244T12, D5244T15, D5244T17 only
What does this fault code mean?
The code is set when the signal from the particle filter pressure sensor falls outside a set limit and is too low. The engine control module (ECM) measures the pressure upstream and downstream of the filter and checks the signal against a calculated value. The causes concern the wiring and connectors as well as the sensor itself.
Possible causes
- Contact resistance or oxidation in the connections
- Signal wire short-circuited to ground
- Supply wire short-circuited to ground
- Damaged particle filter pressure sensor
What you can do
- 1Inspect the connections and wiring to the pressure sensor for looseness, contact resistance and oxidation
- 2Use a multimeter to check that the signal wire to the pressure sensor is not short-circuited to ground
- 3Use a multimeter to check that the supply voltage wire to the pressure sensor is not short-circuited to ground and has no open circuit
- 4If you have a diagnostic tool, read the adapted pressure difference across the particle filter in live data
- 5After replacing the pressure sensor, the control module needs its offset value reprogrammed for the new sensor; have a workshop do this with diagnostic equipment
Symptoms you may notice4
- The car runs poorly and lacks power, even when pulling away from standstill
- The engine hesitates or surges during acceleration, deceleration or at steady speed
- The engine warning lamp (Check engine) lights up or behaves abnormally
- A warning symbol and a text message appear in the display
What the fault can affect3
- Engine output, speed and torque are limited
- Exhaust gas recirculation (EGR) control is lost
- Burning of soot particles does not take place
General guidance for car owners. Diagnosis on the car can point to a different cause.