VOLVO
ECM-P263200 - Fuel Pump "B" Control Circuit/Open. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo S80 (2007–)2014–2015Engine B4204T11, B4204T12, B4204T15 only
- Volvo V40 (2013–)2015Engine B4204T11 only
- Volvo V40 Cross Country (2013–)2015Engine B4204T11 only
- Volvo V60 (2011–)2014–2015Engine B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo V70 (2008–)2014–2015Engine B4204T11 only
- Volvo XC60 (2009–)2014–2015Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11 only
What does this fault code mean?
The engine control module (ECM) sets fuel pressure through the fuel pump control module (PEM) using a PWM signal. This code concerns fuel pump B and is set when the PWM link from the engine control module to the fuel pump module has no signal.
Possible causes
- Open circuit in the signal wire
- Damaged fuel pump control module
What you can do
- 1If you have a diagnostic tool: read the frozen values and fault counter of the code to see when the fault occurred
- 2Check that the fuse for the fuel pump is intact
- 3Check the connectors and the wire between the engine control module and the fuel pump control module for breaks and chafing
- 4If you have a diagnostic tool, read the fuel pressure in live data and see whether it follows the pressure the engine control module requests
- 5If nothing is found, have a workshop check the fuel pump control module
Symptoms you may notice2
- Engine cranks but does not start
- Engine may stall while driving
General guidance for car owners. Diagnosis on the car can point to a different cause.