VOLVO
ECM-P269600 - Injector data incompatible. General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (8)
- Volvo S60 (2011–)2014–2015Engine D4204T5 only
- Volvo S80 (2007–)2014–2015Engine D4204T5 only
- Volvo V40 (2013–)2015Engine D4204T14 only
- Volvo V40 Cross Country (2013–)2015Engine D4204T14 only
- Volvo V60 (2011–)2014–2015Engine D4204T5 only
- Volvo V70 (2008–)2014–2015Engine D4204T5 only
- Volvo XC60 (2009–)2014–2015Engine D4204T5 only
- Volvo XC70 (2008–)2014–2015Engine D4204T5 only
What does this fault code mean?
Each injector has a memory circuit with data about that particular injector. The code is set when the engine control module (ECM) cannot store the memory value from an injector, and it is tested with the engine running. The last stored value from the injector is then used.
Possible causes
- Internal fault in the injector
What you can do
- 1Read the code with a diagnostic tool and check whether it is active or only stored
- 2Clear the code and run the engine; if it comes back, it is the same fault
- 3Have a workshop check the injectors, since the fault lies in an injector's own memory circuit
- 4If the workshop finds no fault in the injectors, ask them to check how the engine control module stores the injector values
Symptoms you may notice1
- No noticeable symptoms for the driver
What the fault can affect1
- The engine control module keeps using the last stored value from the injector
General guidance for car owners. Diagnosis on the car can point to a different cause.