VOLVO
ECM-U010181 - Lost communication with Transmission Control Module (TCM). Bus Signal / Message Failures. Invalid serial data received
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The ECM gets a torque request signal from the transmission control module (TCM). Even though the code is named invalid data, it applies when the signal is missing, and the code can be a follow-on fault if the transmission control module has a code of its own.
Possible causes
- Damaged transmission control module (TCM)
What you can do
- 1Read the codes in the engine control module; if there are other CAN-related codes, fault-trace those first
- 2Read the codes in the transmission control module (TCM), since a code there may be the root cause
- 3If you have a diagnostic tool: clear the code, drive for a while and read whether it is set again
- 4Have a workshop check the transmission control module if the code returns, since it may be damaged
- 5Tell the workshop if any control module has recently been replaced, since its software then has to be reloaded
Symptoms you may notice1
- The automatic gearbox shifts hard or jerkily, sometimes or all the time
What the fault can affect1
- Torque requests from the transmission control module (TCM) are no longer used by the ECM
General guidance for car owners. Diagnosis on the car can point to a different cause.