VOLVO
ECM-U010187 - Lost communication with Transmission Control Module (TCM). Bus Signal / Message Failures. Missing message
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The ECM expects a torque request from the TCM and sets the code when it is missing. The code may be a follow-on fault: if the transmission control module has a code of its own, that one should be fault-traced first.
Possible causes
- Damaged transmission control module (TCM)
What you can do
- 1Read the codes in the transmission control module (TCM) first, since they may show the root cause
- 2Read the codes in the engine control module and deal with any other CAN-related codes before this one
- 3Use a multimeter to check that the CAN wires between the engine control module and the transmission control module have no break
- 4If you have a diagnostic tool: clear the code only after the root fault has been fixed, then check that it is not set again
- 5Have a workshop check the transmission control module if the code returns after the root cause has been fixed
Symptoms you may notice1
- The automatic gearbox shifts hard or jerkily all the time
What the fault can affect1
- Torque requests from the transmission control module (TCM) are no longer used by the ECM
General guidance for car owners. Diagnosis on the car can point to a different cause.