VOLVO
HLDF-B118002 - Display raise. General Failure Information. General signal failure
System
Unknown System / Manufacturer Specific
Volvo models this fault code applies to
Applies to the following models:
3 modelsS80 (2007–), V70 (2008–), XC70 (2008–)
Show models by year and engine (3)
What does this fault code mean?
The front display module raises and lowers the screen with electric motors and checks the signal from the limit switches. The fault code is set when the information from the upper limit switch is missing after several attempts to raise the screen. The display then does not fold up.
Possible causes
- Internal fault in the front display module (HLDF)
- Damaged front display module (HLDF)
What you can do
- 1Check that the fuses are intact
- 2Use the controls to check whether the display moves up and down, and note where it stops
- 3Check that the connector to the display module is secure and free from oxidation
- 4Have a workshop check the module, since the fault may lie inside it
Symptoms you may notice2
- The front display does not work
- The display will not fold up
General guidance for car owners. Diagnosis on the car can point to a different cause.