VOLVO
HLDF-U300055 - Control Module. System Programming Failures. Not configured
System
Unknown System / Manufacturer Specific
Volvo models this fault code applies to
Applies to the following models:
4 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (4)
What does this fault code mean?
The front display control module is not configured, and the cause is an internal fault in the module. The front display then does not work and does not fold up.
Possible causes
- Internal fault in the front display control module
What you can do
- 1Clear the fault code and start the car to see whether it returns
- 2Check that the fuses are intact
- 3Have a workshop check and, if needed, configure the display module, since this is a workshop task
- 4If the fault remains after configuration, have a workshop check the module
Symptoms you may notice2
- The front display does not work
- The display will not fold up
General guidance for car owners. Diagnosis on the car can point to a different cause.