VOLVO
IAM-U210000 - Control Module Not Configured. General Failure Information. No sub type information
System
Integrated Audio Module (IAM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The IAM depends on the car's configuration data held in the central electronic module (CEM), and the control module has not been configured. The fault is set when the configuration file cannot be obtained.
Possible causes
- The vehicle's configuration data (vehicle configuration) does not reach the audio module
What you can do
- 1Read the code, clear it and check whether the audio system works after a test drive
- 2Check that the audio system fuses are intact; the location of each fuse is in the owner's manual or on the cover of the fuse box
- 3Have a workshop read the configuration in the central electronic module (CEM) with diagnostic equipment and configure the audio module
Symptoms you may notice1
- The audio system does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.