VOLVO
ICM-B125209 - USB Port. General Failure Information. Component Failures
System
Infotainment Control Module (ICM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The infotainment control module (ICM) monitors communication with the USB port, and the code is set when a fault on the port is detected. The cause may be a damaged wire, a damaged fuse, or an internal fault in the module. USB accessories do not work while the fault is present.
Possible causes
- Damaged wire
- Damaged fuse
- Internal fault inside the ICM unit
What you can do
- 1Check that the fuses are intact. Their locations are in the owner's manual or on the fuse box cover
- 2Try another USB accessory. If it is not recognised either, the fault is likely in the port or its wire
- 3Check the USB cable for chafing, breaks and loose connectors
- 4With a diagnostic tool, run the self-test and check whether the code returns. If the fault remains, the infotainment control module may need replacing, which a workshop does
Symptoms you may notice1
- USB accessory does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.