VOLVO
ICM-B12858F - Video Input "D". Bus Signal / Message Failures. Erratic
System
Infotainment Control Module (ICM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
ICM and the integrated audio module (IAM) exchange a video signal over an LVDS link. The code is set when ICM finds the video signal faulty. The fault appears irregularly, so the picture may work for a while and then break up again.
Possible causes
- Sync signal from the LVDS input is wrong at the control module
- Loose contact where the video cable joins the control module
- Damaged wire running from the control module to the LVDS input
What you can do
- 1Check that the fuses are intact. Their positions are in the owner's manual or on the fuse box cover
- 2Test the functions with buttons, controls or a drive, and note when the picture gets worse
- 3Check that the connectors at the LVDS input and the audio module are intact and free from oxidation. Move them gently while watching the picture
- 4Inspect the video wire for chafing and breaks. With a diagnostic tool, run the quick test and check whether the code returns
Symptoms you may notice3
- Other video problems
- Poor image quality or no picture on the front screen
- Rear entertainment does not work, works only partly or works incorrectly
General guidance for car owners. Diagnosis on the car can point to a different cause.