Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    IEM-U000155
    VOLVO

    IEM-U000155 - High Speed CAN Communication Bus. System Programming Failures. Not configured

    System

    Unknown System / Manufacturer Specific

    Volvo models this fault code applies to

    Applies to the following models:

    1 model

    V60 (2011–)

    Show models by year and engine (2)
    • Volvo V60 (2011–)2013–2014Engine D82PHEV only
    • Volvo V60 (2011–)2015Engine D82PHEV, D87PHEV only

    What does this fault code mean?

    The control modules on the CAN network communicate with a standardized method. Here the signal configuration IDs for the HS-CAN (the high speed CAN network) do not match, or something is disturbing the network. The causes are a control module that is not intended for this car, for example a used one with different software or hardware, or a software fault in the IEM or in the airbag control module (SRS). The control module stays switched off until the power supply has been broken and reconnected.

    Possible causes

    • Incorrect configuration ID, for example a used control module that is not intended for this car
    • Software fault in the electric rear axle drive control module (IEM)
    • Software fault in the airbag control module (SRS)

    What you can do

    1. 1Has a control module recently been replaced with a used one? Have a workshop check that it is intended for this car and that the right software is loaded
    2. 2Have a workshop download the latest software to the IEM and check the SRS control module. High voltage systems may only be handled by qualified personnel
    3. 3Do not work on the airbag system yourself. Have a workshop check it if the fault remains
    4. 4After the repair, read out the fault codes with the ignition on and check that the code is not stored again

    Symptoms you may notice4

    • Text window and warning symbol with a text message
    • Drive mode PURE disengages automatically or is unavailable
    • Drive mode AWD disengages automatically or is unavailable
    • Drive mode HYBRID: the combustion engine runs all the time or too often

    What the fault can affect3

    • The control module shuts itself off (bus-off)
    • Electric propulsion is not possible
    • Brake energy regeneration from the electric rear axle is not possible

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.