VOLVO
IEM-U041268 - Invalid Data Received From Battery Energy Control Module (BECM). Algorithm Based Failures. Event information
System
Unknown System / Manufacturer Specific
Volvo models this fault code applies to
Applies to the following models:
1 modelV60 (2011–)
Show models by year and engine (2)
What does this fault code mean?
The electric rear axle drive module (IEM) is not getting at least one signal from BECM, the battery energy control module. The fault is only checked once the test has started at ignition on, and the code is stored when the conditions are met.
Possible causes
- Oxidation, contact resistance or loose contacts at the terminals to Sensor CAN
- Damaged cables on Sensor CAN
- Software error in the electric rear axle drive module (IEM)
- Software fault in the BECM (battery energy control module)
- Internal fault inside the ISC voltage converter
What you can do
- 1Read out and note the code, clear it and road test to see whether it returns
- 2Have a workshop check that the connectors to Sensor CAN are fully engaged and free from corrosion
- 3Have a workshop check chafed or damaged CAN cables
- 4Have a workshop with diagnostic equipment check communication with the battery energy control module and load the latest software to the control modules if needed
- 5Do not work on the electric rear axle or the battery high voltage system yourself; have a workshop carry out those checks
Symptoms you may notice4
- Warning symbol and text message in the display
- PURE drive mode disengages by itself or is not available
- AWD drive mode disengages by itself or is not available
- HYBRID drive mode runs with the combustion engine active all the time or too often
What the fault can affect2
- Electric propulsion is not possible
- Brake energy recovery from the electric rear axle ERAD is not possible
General guidance for car owners. Diagnosis on the car can point to a different cause.