VOLVO
IGM-B200949 - Insulated Gate Bipolar Transistor. System Internal Failures. Internal electronic failure
System
Unknown System / Manufacturer Specific
Volvo models this fault code applies to
Applies to the following models:
1 modelV60 (2011–)
Show models by year and engine (2)
What does this fault code mean?
The high voltage generator control module (IGM) watches over its own internal parts. The code is stored when one or more internal components in the control module do not work. The fault is only checked once the vehicle is in driving position, meaning the car has been cranked and either the electric or the combustion engine has started.
Possible causes
- Internal fault inside the ISC voltage converter
What you can do
- 1Read out and note the code, clear it and start the car
- 2Have a workshop check the ISC voltage converter and the high voltage generator control module
- 3The high voltage system may only be handled by a workshop; do not work on it yourself
Symptoms you may notice5
- Warning symbol and text message in the display
- Warning about power supply problems from the alternator and charge regulator
- Charging of the high voltage battery while driving is absent, reduced or not working correctly
- High voltage battery is discharged or charges poorly
- HYBRID drive mode: the combustion engine is active all the time or too often
What the fault can affect1
- The high voltage battery cannot be charged by the combustion engine
General guidance for car owners. Diagnosis on the car can point to a different cause.