VOLVO
KVM-0001 - Receiver. No communication
System
Keyless Vehicle Module (KVM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
What does this fault code mean?
The keyless vehicle module (KVM) checks communication with the keyless remote receiver (RKE) whenever the key is used, for example for unlocking, locking, passive start, or key activation and deactivation. The code is stored when the signal to the receiver is too low or when the receiver is not connected.
Possible causes
- A break in the signal wire
- The keyless remote receiver (RKE) is not connected
What you can do
- 1Try locking and unlocking the car with the remote control to see whether it works
- 2Clear the code and check whether it returns
- 3Check that the fuses are intact
- 4Check that the connectors to the remote receiver are firmly seated and free from oxidation
- 5If the fault remains, have a workshop check the signal wire to the remote receiver and that it is connected
Symptoms you may notice1
- The car cannot be locked or unlocked with the remote control
General guidance for car owners. Diagnosis on the car can point to a different cause.