VOLVO
KVM-U201F13 - External receiver. General Electrical Failures. Circuit open
System
Keyless Vehicle Module (KVM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The code points to an electrical fault with an open circuit, meaning a break, in the receiver or in the signal cable to it. The control module checks communication with the receiver, which picks up the signal from the remote key.
Possible causes
- Break in the communication cable
What you can do
- 1Look for broken, chafed or loose connectors on the signal wire running from the KVM to the receiver
- 2If a break is suspected, have a workshop measure the cable between the KVM and the receiver; the cable and connectors must be intact
- 3If the cable and connectors are intact but voltage is present at the receiver (RRX), it is most likely an internal fault in it; have a workshop confirm this
- 4If the receiver is intended for another car, have a workshop fit one that suits this particular car
- 5Clear the code and road test the car to see whether it returns
Symptoms you may notice2
- The remote control cannot be used
- No, or reduced, keyless function
General guidance for car owners. Diagnosis on the car can point to a different cause.